granular Products List
Total
Product(s) in
Double-Screw-Waste-Plastics-Pelletizer--.jpg)
JT-JS-90, 100, 110, 120 double-screw & double-layer waste plastics pelletizer is used for PP, LLDPE,LDPE, HDPE waste plastic recycling. It is workable for both wet material and dry material. It adopts progremmed control system,automatic temperature control system, double-layer filter. It adopts 2.5 meter water tank for cooling and water remover for good drying/
Main Technical Parameters:
Model type | JT-JS-90 | JT-JS-100 | JT-JS-110 | JT-JS-120 |
Diameter of screw | 85mm | 95mm | 105mm | 110mm |
Dia. ratio of screw | 20:1-22:1(L/D) | |||
Rational speed of screw | 10-110 rpm | |||
Main motor power | 22 kw | 30 kw | 37kw | 45kw |
Output | 60kg/h | 90kg/h | 110kg/h | 130kg/h |
Machine weight | 2 t | 2.1t | 2.2t | 2.5t |
Overall dimensions(L*W*H) | 5800*1250*1100 | 5900*1300*1200 | 6000*1350*1300 | 6200*1400*1350 |
The Auxiliary Unit Technical Parameters:
Diameter of screw stem | 120mm |
Major diameter ratio of screw stem | 8:1(L/D) |
Rationed speed of screw stem | 10-110 rpm |
Motor power | 15 kw |
Machine weight | 0.6 t |
Overall dimensions(L*W*H) | 1700*680*1200mm |
It is used for producing LDPE or LLDPE stretch film. If the machine adopts double screws, the two hoppers should use different type of material, one side of the extruded stretch film is adhesive and the other side is normal. It is widely used for packing architecture and hardware parts etc.
Characteristics:
1. screw and cylinder are all made of 38CRMOALA alloy and treates by nitrogen. It has an advantage of corrosion resistance and endurance etc.
2. The cooling device adopts cycle water cooling; provide the best transparent effect of the stretch film.
3. Take-up equipment adopts with friction type rewinding and equipment with edge correcting device to ensure the quality.
Main Technical Parameters:
Model | JTSJ-50*2 | JTSJ-60 |
Diameter of screw | 50mm *2 | 60mm |
L/D | 30:1 | 30:1 |
Width of products | 200-600mm | 200-600mm |
Thickness | 0.015-0.03mm | 0.015-0.03mm |
Output | 40 kg/h | 30kg/h |
Main motor power | 7.5 kw*2 | 15kw |
Heating power | 30kw | 30 kw |
Machine weight | 3.5 T | 3T |
Overall dimensions | 5600*2600*1800mm | 6000*1500*2500mm |
Power supply | 380V/3Ph/4line/50Hz | |
It?s applicable for recycle of waste film, such as CPE, PE, CPP, PO, PP, PET, PA material. And the speed is adjustable, the cutting size is adjustable as well.
