plastic recycling machine Products List
Total
Product(s) in
It is used for producing LDPE or LLDPE stretch film. If the machine adopts double screws, the two hoppers should use different type of material, one side of the extruded stretch film is adhesive and the other side is normal. It is widely used for packing architecture and hardware parts etc.
Characteristics:
1. screw and cylinder are all made of 38CRMOALA alloy and treates by nitrogen. It has an advantage of corrosion resistance and endurance etc.
2. The cooling device adopts cycle water cooling; provide the best transparent effect of the stretch film.
3. Take-up equipment adopts with friction type rewinding and equipment with edge correcting device to ensure the quality.
Main Technical Parameters:
Model | JTSJ-50*2 | JTSJ-60 |
Diameter of screw | 50mm *2 | 60mm |
L/D | 30:1 | 30:1 |
Width of products | 200-600mm | 200-600mm |
Thickness | 0.015-0.03mm | 0.015-0.03mm |
Output | 40 kg/h | 30kg/h |
Main motor power | 7.5 kw*2 | 15kw |
Heating power | 30kw | 30 kw |
Machine weight | 3.5 T | 3T |
Overall dimensions | 5600*2600*1800mm | 6000*1500*2500mm |
Power supply | 380V/3Ph/4line/50Hz | |
It?s applicable for recycle of waste film, such as CPE, PE, CPP, PO, PP, PET, PA material. And the speed is adjustable, the cutting size is adjustable as well.
3. JT-SJ-90(100,-110,-120)-Air-Cooling-Type-Recycling-Pelletizing-Machine(Plastic Recycling Pelletizer)
-Air-Cooling-Type-Recycling-Pelletizing-Machine.jpg)
JT-SJ-90, 100, 110, 120 air cooling type plastics recycling pelletizing machine is used for LDPE, HDPE waste plastics recycling pelletizing without air hole and waster vapor but air cooling. It adopts automatic temperature control system, It adopts 38Crmoala material screw and barrel is nitrogen treated. It adopts 4 knives pelletizer with high output. It has a merit of as easy operation, low cost, high output,
Main Technical Parameter:
Model type | JT-JS-90 | JT-JS-100 | JT-JS-110 | JT-JS-120 |
Screw Diameter | 85 MM | 95 MM | 105 MM | 110 MM |
Screw Ratio | 20:1-22:1(L/D) | |||
Screw Line Speed | 10-110 RPM | |||
Power | 22 KW | 30 KW | 37 KW | 45 KW |
Output | 60 KG/H | 90 KG/H | 110 KG/H | 130 KG/H |
Weight | 2 TON | 2.1 TON | 2.2 TON | 2.5 TON |
Overall Dimensions | 5800*1250*1100MM | 5900*1300*1200MM | 6000*1350*1300MM | 6200*1400*1350MM |
